Multi-Function Indicator
FM18 rewrites the requirements of being a
powerful indicator. It contains nearly all the
features and functions which static and
simple dynamic industrial weighing
applications need.
Equipped with a 24-bit Low-Noise Δ-Σ
Analog-to-Digital Converter, special linearity
compensation method plus all other state-of-the-art technologies applied. These enable
FM18 to provide fast, stable, and almost error-free weighing results anytime when needed.
True 6-wire load cell compensation system, easily drives up
to 8 x 350 Ω, runs at 1.6 million internal counts plus all the
built-in function, these are the foundation that makes FM18
good for nearly all static and mid to low-speed dynamic
weighing applications.
FM18 (FM18)
FUNCTIONS
1. Weighing
2. Check weighing Function
3. Piece Count Mode with Check Function
4. Percentage Mode with Check Function
5. Animal Weighing
6. User Programmable Check Functions Buzzer Output
7. Memory Accumulation
8. Pre-set Tare
9. Independent and User Programmable Print Format for Weighing, Piece Count, Percentage Mode
10. Independent and User Programmable Data Format for Check weighing, Piece Checking, Percentage Checking
11. Built-in Inflow and Outflow Control Logic
12. Built-in Near Zero Logic for Dynamic Weighing
Applications
1. Support Ticket and Label Printing
2. Support Q&A with other Peripherals
3. Support Direct Control by External Peripheral
4. User Selectable Parameters: -
5. 6 x Auto Power Off Time
6. 4 x Filter Intensity Mode
7. 3 x Backlight Mode
8. 2 x Selectable Auto Tare Function
9. 4 x RS232 Data Output Baud Rate
10. 4 x Output Mode
11. 3 x Data Format
12. 3 x M Mode
13. 3 x Data Output Mode
14. 4 x Data Transmission Time Interval
15. 8 x Number of Print Copy
16. 6 x Output Band Rate
17. 7 x Initial Zero Range
18. 7 x Manual Zero Range
19. 6 x Auto Zero Tracking Range
20. Bi-Directional Communication through RS232 or TTL Interface
KEY FEATURES
1. 24 bit Low-Noise Delta to Sigma to Delta (Δ-Σ) Analog-to-Digital Converter
2. Support Single or Dual Weighing Range Mode
3. Free Capacity and Division Setting
4. kg & lb Conversion (Single Weighing Range Mode only)
5. True 6-wire (with Remote Sense) Load Cell Compensation System
6. Power up to 8 x 350Ω Load Cells or 16 x 700Ω Load Cells
7. Supports 4-wire and 6-wire Load Cell Connections
8. Real Time Clock
9. Linearity Compensation ON or OFF
10. Independent Zero Calibration.
11. Auto or User Programmable Odd Weight Calibration
12. Calibration and Metrological Control / Access by Hardware or Software
13. Non-Resettable Trailer Count to Record Calibration and Metrology Parameters Changes.
14. Gravity Compensation via Keyboard
15. 6 x 1-inch Wide Angle LCD Numeric Digits
16. Capacity Tracking Bar to Show Applied & Remaining Weighing Capacity
17. Battery Protection Features and Circuits
18. Equipped with RS232, TTL Relay Output, Wireless Communication Interfaces/TTL RS232
19. Backlight, Rechargeable Battery, Power Adaptor and Pillar (ψ35~38mm) Mount Holder Included
OPTIONS
1. RELAY-4, 4-Channels Relay Module
2. WM Wireless Communication Module
3. Stainless Steel Wall/Desk Mount Holder
4. SP-POS58EZ Thermal Printer
5. RD-DOT Dot Matrix Remote Display
6. LP-50 Label Printer
FM18 rewrites the requirements of being a
powerful indicator. It contains nearly all the
features and functions which static and
simple dynamic industrial weighing
applications need.
Equipped with a 24-bit Low-Noise Δ-Σ
Analog-to-Digital Converter, special linearity
compensation method plus all other state-of-the-art technologies applied. These enable
FM18 to provide fast, stable, and almost error-free weighing results anytime when needed.
True 6-wire load cell compensation system, easily drives up
to 8 x 350 Ω, runs at 1.6 million internal counts plus all the
built-in function, these are the foundation that makes FM18
good for nearly all static and mid to low-speed dynamic
weighing applications.
- 1