Fidelity Measurement

Short Description:
Aluminum-alloy IP65 single point load cell
Colourless anodized
Suitable for single and double load cells structured platform scales
Maximum platform size: 600 x 600 mm
A 1000 Ohm type available (R1) but is excluded from OIML
Manufacturer: Fidelity Measurement Co. Ltd
Origin: Assembled in Taiwan

Available Capacity:

Capacity	Accuracy	Full Article Description
50kg	C3	L6G-C3-50kg-3G6
100kg	C3	L6G-C3-100kg-3G6
150kg	C3/C4	L6G-C3/C4-150kg-3G6
200kg	C3/C4	L6G-C3/C4-200kg-3G6
250kg	C3/C4	L6G-C3/C4-250kg-3G6
300kg	C3/C4	L6G-C3/C4-300kg-3G6
500kg	C3/C4	L6G-C3/C4-500kg-3G6
600kg	C3/C4	L6G-C3/C4-600kg-3G6

Technical Specifications of FM1263

Accuracy Class		OIML R60 C3, OIML R60 C4
Output Sensitivity ( FS )	mV/V	2.0 ± 0.2
Maximum Capacity ( Emax )	kg	50, 100, 150, 200, 250, 300, 500, 600; 150, 200, 250, 300, 500, 600
Max. Number of Load Cell Intervals	nLC	3000, 4000
Ratio of min. LC Verification Interval	Y = Emax / Vmin	10000, 15000
Combined Error	%FS	≤± 0.02
Creep Error (30 minutes)	%FS	≤± 0.02
Temperature Effect on Zero (ZTC)	%FS/10°C	≤± 0.0230; ≤± 0.0175
Minimum dead load	Of Emax	0%
Safe overload	Of Emax	150 %
Ultimate Overload	Of Emax	300 %
Zero balance	Of FS	< ± 2.0 %
Excitation, Recommended Voltage	V	5 ~ 12
Excitation, Maximum Voltage	V	18
Input Resistance	Ω	409 ± 6
Output Resistance	Ω	350 ± 3
Insulation Resistance	MΩ	>5000 (at 50VDC)
Compensated Temperature	°C	-10 ~ 40
Operating Temperature	°C	-35 ~ 65
Storage Temperature	°C	-40 ~ 70
Element Material		Aluminum
Ingress Protection (acc. to EN 60529)		IP65
Recommended Torque on Fixation Bolts	Nm	M8:25

Wiring:
Shielded, 6 conductor cable
Cable diameter: Ø6mm
Cable length: 3m
Shield connected to element
Cable jacket in PVC

Wiring Instruction:
Input(Positive) - Red
Sense(Positive) - Blue
Output(Positive) - Green
Output(Negative) - White
Sense(Negative) - Yellow
Input(Negative) - Black

DJB Digital Junction Box converts the signal from individual TTL load cells into Single Digital ones, then further processes these digital signals into meaningful readings like weight and totalized AD counts according to predefined parameters given to it. Samples of these parameters are capacity, division, decimal place, filter, auto zero tracking speed, weight units … etc.

Eccentric adjustment of multi-load cells 
installation becomes easy with DJB. 

DJB calculates and compensates automatically the span gain of each load cell channel. Manual eccentric adjustment and span gain are also supported by DJB. Each load cell channel is supported by an independent 24-bit Δ-Δ- Digital Signal-to-Digital Weight Converter, a special linearity compensation method plus all other state-of-the-art technologies applied, all these together enable DJB to provide fast, stable, and almost error-free weighing results at any time and anywhere. 

Driver software is available to make setup nothing more 
than mouse clicks, selections on the screen, and numeric 
entries by fingertips. 

Metrology Functions:
 Individual Load Cell Channel On/Off
 Automatic and manual Eccentric and Span adjustment
 Independent Zero Calibration
 Single-point or dual-point calibration
 Odd Weight Calibration
 Free Capacity and Division Setting
 Linearity Compensation ON or OFF
 8 x Initial Zero Range
 6 x Manual Zero Range
 9 x Auto Zero Tracking Range
 6 x Stable Definitions

Operation Functions:
 Weight Reading
 Totalized or Individual AD Value Reading
 Manual Tare
 Manual Zero

Other Selectable Parameters:
 3 x Filter Intensity Mode
 6 x Data Output Baud Rate
 2 x Weight Units
 Transmission by RS232 or RS485

FEATURES
1. 24 Bit Sigma to Delta (Σ-Δ) Analog-To-Digital Converter
2. Multi Functions Indicator
3. Free Capacity and Division Setting
4. 6 x 1-Inch Numeric Digits
5. Tracking Bar to Show Applied & Remaining Capacity
6. Calibration Password Control
7. Power Up To 4 X 350Ω Load Cells or 8 X 700Ω Load Cells
8. Dual Power Source: - By Built-In Rechargeable Battery or External Power Adaptor
9. Lower Power Consumption. Battery Operating Time = 200 Hours plus
10. Built-in Real Time Clock
11. Backlight, Built-In Rechargeable Battery, External Power Adaptor and Stainless-Steel Wall/Desk Mount Holder Included

USER SELECTABLE PARAMETERS
1. 5 x Filter Intensity Mode
2. 3 x Backlight Mode
3. 2 x Selectable Auto Tare Function
4. 5 x RS232 Data Output Baud Rate
5. 7 x Initial Zero Range
6. 6 x Manual Zero Range
7. 4 x Auto Zero Tracking Range
8. 3 x Check weighing Buzzer Output Mode

FUNCTIONS
1. Weighing
2. Check weighing
3. Animal Weighing
4. Piece Count
5. Pre-set Tare
6. Memory Accumulation
7. Kg/lb Conversion Function plus 2 x User Programmable Weight Units
8. Auto Initial Zero Tracking
9. Manual Zero

FUNCTIONS
1. Weighing
2. Check weighing Function
3. Piece Count Mode with Check Function
4. Percentage Mode with Check Function
5. Animal Weighing
6. User Programmable Check Functions Buzzer Output
7. Memory Accumulation
8. Pre-set Tare
9. Independent and User Programmable Print Format for Weighing, Piece Count, Percentage Mode 
10. Independent and User Programmable Data Format for Check weighing, Piece Checking, Percentage Checking
11. Built-in Inflow and Outflow Control Logic
12. Built-in Near Zero Logic for Dynamic Weighing 

Applications
1. Support Ticket and Label Printing
2. Support Q&A with other Peripherals
3. Support Direct Control by External Peripheral
4. User Selectable Parameters: -
5. 6 x Auto Power Off Time
6. 4 x Filter Intensity Mode
7. 3 x Backlight Mode
8. 2 x Selectable Auto Tare Function
9. 4 x RS232 Data Output Baud Rate 
10. 4 x Output Mode
11. 3 x Data Format
12. 3 x M Mode
13. 3 x Data Output Mode
14. 4 x Data Transmission Time Interval 
15. 8 x Number of Print Copy
16. 6 x Output Band Rate
17. 7 x Initial Zero Range
18. 7 x Manual Zero Range
19. 6 x Auto Zero Tracking Range
20. Bi-Directional Communication through RS232 or TTL Interface

KEY FEATURES
1. 24 bit Low-Noise Delta to Sigma to Delta (Δ-Σ) Analog-to-Digital Converter
2. Support Single or Dual Weighing Range Mode
3. Free Capacity and Division Setting 
4. kg & lb Conversion (Single Weighing Range Mode only)
5. True 6-wire (with Remote Sense) Load Cell Compensation System
6. Power up to 8 x 350Ω Load Cells or 16 x 700Ω Load Cells
7. Supports 4-wire and 6-wire Load Cell Connections
8. Real Time Clock
9. Linearity Compensation ON or OFF
10. Independent Zero Calibration.
11. Auto or User Programmable Odd Weight Calibration
12. Calibration and Metrological Control / Access by Hardware or Software
13. Non-Resettable Trailer Count to Record Calibration and Metrology Parameters Changes.
14. Gravity Compensation via Keyboard
15. 6 x 1-inch Wide Angle LCD Numeric Digits
16. Capacity Tracking Bar to Show Applied & Remaining Weighing Capacity
17. Battery Protection Features and Circuits
18. Equipped with RS232, TTL Relay Output, Wireless Communication Interfaces/TTL RS232
19. Backlight, Rechargeable Battery, Power Adaptor and Pillar (ψ35~38mm) Mount Holder Included 

OPTIONS
1. RELAY-4, 4-Channels Relay Module
2. WM Wireless Communication Module
3. Stainless Steel Wall/Desk Mount Holder
4. SP-POS58EZ Thermal Printer
5. RD-DOT Dot Matrix Remote Display
6. LP-50 Label Printer

Approved Functions
 Weighing and Simple Counting
 Single and Dual Weighing Range
 Memory Accumulation
 Pre-set Tare
 Gross/Net Indicator
 Weighing Range Indicator
 Memory Indicator
 Standard and User Programmable Print 

Format 
 Ticket and Label Printing
User Selectable Parameters
 6 x Auto Power Off Time
 4 x Filter Intensity Mode
 3 x Backlight Mode
 3 x RS232 Data Output Baud Rate 
 3 x Data Format
 3 x M Mode
 3 x Data Output Mode
 4 x Data Transmission Time Interval 
 7 x Initial Zero Range
 7 x Manual Zero Range

Key Features
 24 bit Low-Noise Delta to Sigma to Delta (Δ-Σ) 
Analog-to-Digital Converter
 Support Single or Dual Weighing Range Mode
 Free Capacity and Division Setting 
 kg & lb Conversion (Single Weighing Range 
Mode only)
 True 6-wire (with Remote Sense) Load Cell Compensation System
 Real Time Clock
 Linearity Compensation ON or OFF
 Independent Zero Calibration
 User selectable dot or comma for decimal point
 Calibration and Metrological Control / Access by Hardware or Software
 Non-Resettable Trailer Count to Record Calibration and Metrology Parameters Changes.
 Gravity Compensation via Key Board
 6 x 28mm Wide Angle LCD Numeric Digits
 1 x RS232 Output Port, Rechargeable Battery, Backlight, Pillar Mount Holder (ψ35~38mm) and Universal Power Adaptor Included

Options
 WM-EP Wireless Communication Module
 Stainless Steel Wall/Desk Mount Holder
 SP-POS58EZ Thermal Printer
 RD-DOT Dot Matrix Remote Display
 LP-50 Label Printer

Independently Configurable Function Modes
 Static & Dynamic Weighing
 Piece Counting
 Action-Tare-Memory (ATM)
 Peak Measuring
 Grading and sorting up to 10 Set Points and 8 Grades
 Checking Functions for Weighing, Piece Counting, ATM, Grading, and Sorting Function

Displays and Indications
 1 Primary plus 2 Secondary Displays provide Clear Information about Results, Settings, and the Next Target Value of the Current Operation
 Tri-Color Check Result Light Bars Present Pinpoint Accuracy about where and how far the Current Weight is and away from the Target Value
 Zero, Net, Weight Unit, Memory, Low Battery, Relay Output, and Charge Status Indicators

Built-In Control Logic
 Static and Dynamic Check
 Inflow and Outflow Control
 Constant Feeding
 Constant Dispensing with Auto Refilling,
 Dual Speed Filling
 Batching up to 8 Ingredients
 Dual Speed Discharge
 Discharge and Refill
 User Programmable Logic for each and individual Relay Output

Connectivity
 Maximum 4 independent configurable comports. Maximum Baud Rate = 921600
 Hardwire Connection Types (standard) include RS232, RS485, and TTL
 Wireless Communication Types (optional) include Bluetooth 2.0 /4.0 and WIFI
 Optional isolated RS232 to Ensure High-Speed Data Communication even
in a High Interference Environment
 Optional Built-in 8-Channel Control Relay Board.

Operation Features
 Primary and Secondary Displays: -
 Display #1: - 6 x 25mm LED Numeric Digits
 Display #2: - 6 x 10mm LED Numeric Digits
 Display #3: - 6 x 10mm LED Numeric Digits
 Support Single Range, Dual Range, and Dual Interval Operation 
 Support both Tension and Compression Load / Force Direction
 Near Zero Weight Value for Dynamic Weighing to avoid False Signal Output
 Repetitive and Continuous Tare Operation
 Continuous Tare with Configurable Delay Time before Tare Action
 Real-Time Clock with Backup Battery
 Watchdog System to Prevent Damages Caused by Load Cell Short-circuit. 
 Configurable Tri-Color Check Result Light Bar
 Configurable Keypad, Check & System Buzzer

Management Features
 130000 Non-Resettable Transaction Memory
 Daily, Monthly, specific Period Report Output
 Multi-Search Criteria for Report Generation
 Configurable Machine ID, Machine Group, and Operator Number to Enhance Ease of Multi
 Scales Applications and Management Records
 Customer & Product Code Input through a Serial Scanner, Keypad, or Barcode Reader
 Customer & Product Code Support Numbers, Alphabets, and Selected Symbols
 Quick Access PLUs for Weight Limits, Quantity Limits, and Preset Tare Values
 Direct PLUs for Customer & Product Codes
 Check Result Control for Accumulation, Data Printout & Data Output
 Keypad Lock Function
 Support Inquiry, Setting, and Execution Commands from PC
 All Current Operation Results Output in Data Base Format Increases Ease & Efficiency of Data Management, Processing & Analysis
 Support Ticket Printer and Label Printer (Dates LP-50 & TSC TDP-225, TDP-247, TDP-345, TTP225, TTP-247, TTP-345)
 Selectable Portrait / Landscape Ticket Printout Format
 10 x Built-in Predefined Continuous / Internal Output Protocol
 User Programmable Continuous / Internal Output 
Protocol 

Apps for Smart Phones & Devices
iOS App (i19) & Android App (a19) are available for free download at App Store and Google Play respectively. Both Apps support connection via 
Bluetooth and WIFI. These Apps are so powerful that they turn your smart devices into a handheld terminal, remote display, remote data input center, and controller of your FM product connected.

End User PC Software 
 Freeware Specially Created to Support End Users
 Real-Time Operation Status Monitoring 
 Operation Parameters Setting
 Real-Time Process Monitoring
 Individual and Totalized Record Storage 
 Database File Output

Options
 Stainless Steel Wall/Desk Mount Holder
 SP-POS58IV & SP-POS88IV Thermal Ticket Printer
 LP-50, TDP-225, TTP-225, TTP-247, TTP-345 Label Printer
 Serial Barcode Reader
 WM Wireless Communication Module
 RD-DOT Dot Matrix Remote Display
 Bluetooth 4.0BLE Module
 Bluetooth 2.0 Module
 Isolated RS232
 Built-in 8-Channel Control Relay Board (Factory Installation)
 WIFI Module
 DPP-250 Bluetooth Thermal Printer

FEATURES
1. 24 Bit Sigma to Delta (Σ-Δ) Analog-To-Digital Converter
2. Multi Functions Indicator
3. Free Capacity and Division Setting
4. 6 x 1-Inch Numeric Digits
5. Tracking Bar to Show Applied & Remaining Capacity
6. Calibration Password Control
7. Power Up To 4 X 350Ω Load Cells or 8 X 700Ω Load Cells
8. Dual Power Source: - By Built-In Rechargeable Battery or External Power Adaptor
9. Lower Power Consumption. Battery Operating Time = 200 Hours plus
10. Built-in Real Time Clock
11. Backlight, Built-In Rechargeable Battery, External Power Adaptor and Stainless-Steel Wall/Desk Mount Holder Included

USER SELECTABLE PARAMETERS
1. 5 x Filter Intensity Mode
2. 3 x Backlight Mode
3. 2 x Selectable Auto Tare Function
4. 5 x RS232 Data Output Baud Rate
5. 7 x Initial Zero Range
6. 6 x Manual Zero Range
7. 4 x Auto Zero Tracking Range
8. 3 x Check weighing Buzzer Output Mode

FUNCTIONS
1. Weighing
2. Check weighing
3. Animal Weighing
4. Piece Count
5. Pre-set Tare
6. Memory Accumulation
7. Kg/lb Conversion Function plus 2 x User Programmable Weight Units
8. Auto Initial Zero Tracking
9. Manual Zero

Capacity: 5V-500mA,9V-500mA,12V-500mA, 9V-1A, 12V-1A.
Origin: Assembled in China
Scale Charger

Type: Male-Female 1 pair with cover.
Origin: Assembled in China

Load cell to Scale to Scale to PC / Other device communication

Capacity: 2 feet
Model: Ch340
Class: C3
Origin: Assembled in China
Scale to PC / Other device communication.

Capacity: 20 meter
Model: HC-05
Class: 10
Brand: Sparkfun
Mfg.: Sparkfun
Origin: China 
Scale to PC / Other device communication.

Model:  JBS 4/6/8/10  
Channel: 4, 6, 8, 10  
Brand: FM  
Mfg.: Fidelity Measurement Co., Ltd  
Origin: Assembled in Taiwan  
Truck, Vehicle, Transport Vehicle, and heavy weight products-based Scale.

Model: JBA 4/6/8/10
Channel: 4, 6, 8, 10
Brand: FM
Mfg.: Fidelity Measurement Co., Ltd
Origin: Assembled in Taiwan
Truck, Vehicle, Transport Vehicle, and heavy weight products-based Scale.

Independently Configurable Function Modes:
 Static & Dynamic Weighing
 Piece Counting
 Action-Tare-Memory (ATM)
 Peak Measuring
 Grading and sorting up to 10 Set Points and 8 Grades
 Checking Functions for Weighing, Piece Counting, ATM, Grading, and Sorting Function

Displays and Indications:
 1 Primary plus 2 Secondary Displays provide Clear Information about Results, Settings, and the Next Target Value of the Current Operation
 Tri-Color Check Result Light Bars Present Pinpoint Accuracy about where and how far the Current Weight is and away from the Target Value
 Zero, Net, Weight Unit, Memory, Low Battery, Relay Output, and Charge Status Indicators

Built-In Control Logic:
 Static and Dynamic Check
 Inflow and Outflow Control
 Constant Feeding
 Constant Dispensing with Auto Refilling,
 Dual Speed Filling
 Batching up to 8 Ingredients
 Dual Speed Discharge
 Discharge and Refill
 User Programmable Logic for each and individual Relay Output

Connectivity:
 Maximum 4 independent configurable comports. Maximum Baud Rate = 921600
 Hardwire Connection Types (standard) include RS232, RS485, and TTL
 Wireless Communication Types (optional) include Bluetooth 2.0 /4.0 and WIFI
 Optional isolated RS232 to Ensure High-Speed Data Communication even in a High Interference Environment
 Optional Built-in 8-Channel Control Relay Board.

Operation Features:
 Primary and Secondary Displays: -
 Display #1: - 6 x 25mm LED Numeric Digits
 Display #2: - 6 x 10mm LED Numeric Digits
 Display #3: - 6 x 10mm LED Numeric Digits
 Support Single Range, Dual Range, and Dual Interval Operation 
 Support both Tension and Compression Load / Force Direction
 Near Zero Weight Value for Dynamic Weighing to avoid False Signal Output
 Repetitive and Continuous Tare Operation
 Continuous Tare with Configurable Delay Time before Tare Action
 Real-Time Clock with Backup Battery
 Watchdog System to Prevent Damages Caused by Load Cell Short-circuit. 
 Configurable Tri-Color Check Result Light Bar
 Configurable Keypad, Check & System Buzzer

Management Features
 130000 Non-Resettable Transaction Memory
 Daily, Monthly, specific Period Report Output
 Multi-Search Criteria for Report Generation
 Configurable Machine ID, Machine Group, and Operator Number to Enhance Ease of Multi
 Scales Applications and Management Records
 Customer & Product Code Input through a Serial Scanner, Keypad, or Barcode Reader
 Customer & Product Code Support Numbers, Alphabets, and Selected Symbols
 Quick Access PLUs for Weight Limits, Quantity Limits, and Preset Tare Values
 Direct PLUs for Customer & Product Codes
 Check Result Control for Accumulation, Data Printout & Data Output
 Keypad Lock Function
 Support Inquiry, Setting, and Execution Commands from PC
 All Current Operation Results Output in Data Base Format Increases Ease & Efficiency of Data Management, Processing & Analysis
 Support Ticket Printer and Label Printer (Dates LP-50 & TSC TDP-225, TDP-247, TDP-345, TTP225, TTP-247, TTP-345)
 Selectable Portrait / Landscape Ticket Printout Format
 10 x Built-in Predefined Continuous / Internal Output Protocol
 User Programmable Continuous / Internal Output Protocol 

Apps for Smart Phones & Devices
iOS App (i19) & Android App (a19) are available for free download at App Store and Google Play respectively. Both Apps support connection via 
Bluetooth and WIFI. These Apps are so powerful that they turn your smart devices into a handheld terminal, remote display, remote data input center, and controller of your FM product connected.

End User PC Software 
 Freeware Specially Created to Support End Users
 Real-Time Operation Status Monitoring 
 Operation Parameters Setting
 Real-Time Process Monitoring
 Individual and Totalized Record Storage 
 Database File Output

Options
 Stainless Steel Wall/Desk Mount Holder
 SP-POS58IV & SP-POS88IV Thermal Ticket Printer
 LP-50, TDP-225, TTP-225, TTP-247, TTP-345 Label Printer
 Serial Barcode Reader
 WM Wireless Communication Module
 RD-DOT Dot Matrix Remote Display
 Bluetooth 4.0BLE Module
 Bluetooth 2.0 Module
 Isolated RS232
 Built-in 8-Channel Control Relay Board (Factory Installation)
 WIFI Module
 DPP-250 Bluetooth Thermal Printer

XSB Series Platform:
Quality, Structural Strength & Accuracy are Safeguarded by:
1. Material Grade
2. Material Thickness
3. Tooling & Method used to handle Material Cutting, Blending … etc.
4. Smart & CNC Made Oversized Heavy Duty Load Cell Supporting & Mounting Blocks
5. Strict Construction Accuracy Standards Applied
6. Smart & High-Quality Stainless Steel Junction Box used
7. OIML / NTEP C3 Approved or FM Special Grade Load Cell
8. High-Density Channel Frame Allocation
9. High-Quality Epoxy Coating Option

Key Features
1. Extremely Rigid Structural Steel Channel Frame Specifically Designed for Heavy Traffic
2. Super Strong Channel Frame Provides Extra Protection by Enclosing the Load Cells, Cable, and Junction Box Inside and away from Chemicals and Other Industrial Elements
3. Heavy-Duty Industrial design Threaded Eyebolt Holes for Easy Lifting
4. Top-of-Floor or In-Floor Mounting
5. Swivel Adjustable Feet Eliminate Weighing Errors due to Misalignment
6. Construction Accuracy: - Better than 0.25%

Option
1. Mild Steel Ramp
2. Pit Installation Frame

Order Code
Model No.: - Nominal Capacity - Load Cell Type. Examples -
1.  XSB-1010-1T-A for platform size = 1 x 1m; nominal capacity = 500kg; with approved load cells.
2. XSB-1215-2T-N for platform size = 1.2 x 1.5m; nominal capacity = 2000kg; with FM Special Grade load cells.

FEATURES:
 24 Bit Sigma to Delta (Σ-Δ) Analog-To-Digital Converter
 Multi Functions Indicator
 Free Capacity and Division Setting
 6 x 1-Inch Numeric Digits
 Tracking Bar to Show Applied & Remaining Capacity
 Calibration Password Control
 Power Up To 4 X 350Ω Load Cells or 8 X 700Ω Load Cells
 Dual Power Source: - By Built-In Rechargeable Battery or External Power Adaptor
 Lower Power Consumption. Battery Operating Time = 200 Hours plus
 Built-in Real Time Clock
 Backlight, Built-In Rechargeable Battery, External Power Adaptor, and Stainless-Steel Wall/Desk Mount Holder Included

USER SELECTABLE PARAMETERS: 
 5 x Filter Intensity Mode
 3 x Backlight Mode
 2 x Selectable Auto Tare Function
 5 x RS232 Data Output Baud Rate
 7 x Initial Zero Range
 6 x Manual Zero Range
 4 x Auto Zero Tracking Range
 3 x Check weighing Buzzer Output Mode

FUNCTIONS:
 Weighing
 Check to weigh
 Animal Weighing
 Piece Count
 Pre-set Tare
 Memory Accumulation
 Kg/lb Conversion Function plus 2 x User Programmable Weight Units
 Auto Initial Zero Tracking
 Manual Zero

XSB Series Platform:
Quality, Structural Strength & Accuracy are Safeguarded by:
1. Material Grade
2. Material Thickness
3. Tooling & Method used to handle Material Cutting, Blending … etc.
4. Smart & CNC Made Oversized Heavy Duty Load Cell Supporting & Mounting Blocks
5. Strict Construction Accuracy Standards Applied
6. Smart & High-Quality Stainless Steel Junction Box used
7. OIML / NTEP C3 Approved or FM Special Grade Load Cell
8. High-Density Channel Frame Allocation
9. High-Quality Epoxy Coating Option

Key Features
1. Extremely Rigid Structural Steel Channel Frame Specifically Designed for Heavy Traffic
2. Super Strong Channel Frame Provides Extra Protection by Enclosing the Load Cells, Cable, and Junction Box Inside and away from Chemicals and Other Industrial Elements
3. Heavy-Duty Industrial design Threaded Eyebolt Holes for Easy Lifting
4. Top-of-Floor or In-Floor Mounting
5. Swivel Adjustable Feet Eliminate Weighing Errors due to Misalignment
6. Construction Accuracy: - Better than 0.25%

Option
1. Mild Steel Ramp
2. Pit Installation Frame

Order Code
Model No.: - Nominal Capacity - Load Cell Type. Examples -
1.  XSB-1010-1T-A for platform size = 1 x 1m; nominal capacity = 500kg; with approved load cells.
2. XSB-1215-2T-N for platform size = 1.2 x 1.5m; nominal capacity = 2000kg; with FM Special Grade load cells.

FEATURES:
 24 Bit Sigma to Delta (Σ-Δ) Analog-To-Digital Converter
 Multi Functions Indicator
 Free Capacity and Division Setting
 6 x 1-Inch Numeric Digits
 Tracking Bar to Show Applied & Remaining Capacity
 Calibration Password Control
 Power Up To 4 X 350Ω Load Cells or 8 X 700Ω Load Cells
 Dual Power Source: - By Built-In Rechargeable Battery or External Power Adaptor
 Lower Power Consumption. Battery Operating Time = 200 Hours plus
 Built-in Real Time Clock
 Backlight, Built-In Rechargeable Battery, External Power Adaptor, and Stainless-Steel Wall/Desk Mount Holder Included

USER SELECTABLE PARAMETERS: 
 5 x Filter Intensity Mode
 3 x Backlight Mode
 2 x Selectable Auto Tare Function
 5 x RS232 Data Output Baud Rate
 7 x Initial Zero Range
 6 x Manual Zero Range
 4 x Auto Zero Tracking Range
 3 x Check weighing Buzzer Output Mode

FUNCTIONS:
 Weighing
 Check to weigh
 Animal Weighing
 Piece Count
 Pre-set Tare
 Memory Accumulation
 Kg/lb Conversion Function plus 2 x User Programmable Weight Units
 Auto Initial Zero Tracking
 Manual Zero

XSB Series Platform:
Quality, Structural Strength & Accuracy are Safeguarded by:
1. Material Grade
2. Material Thickness
3. Tooling & Method used to handle Material Cutting, Blending … etc.
4. Smart & CNC Made Oversized Heavy Duty Load Cell Supporting & Mounting Blocks
5. Strict Construction Accuracy Standards Applied
6. Smart & High-Quality Stainless Steel Junction Box used
7. OIML / NTEP C3 Approved or FM Special Grade Load Cell
8. High-Density Channel Frame Allocation
9. High-Quality Epoxy Coating Option

Key Features
1. Extremely Rigid Structural Steel Channel Frame Specifically Designed for Heavy Traffic
2. Super Strong Channel Frame Provides Extra Protection by Enclosing the Load Cells, Cable, and Junction Box Inside and away from Chemicals and Other Industrial Elements
3. Heavy-Duty Industrial design Threaded Eyebolt Holes for Easy Lifting
4. Top-of-Floor or In-Floor Mounting
5. Swivel Adjustable Feet Eliminate Weighing Errors due to Misalignment
6. Construction Accuracy: - Better than 0.25%

Option
1. Mild Steel Ramp
2. Pit Installation Frame

Order Code
Model No.: - Nominal Capacity - Load Cell Type. Examples -
1.  XSB-1010-1T-A for platform size = 1 x 1m; nominal capacity = 500kg; with approved load cells.
2. XSB-1215-2T-N for platform size = 1.2 x 1.5m; nominal capacity = 2000kg; with FM Special Grade load cells.

FM180, OIML 10,000e approved weighing indicator specially designed for static weighing and simple counting tasks. The 7 function keys provide easy, fast, direct, and straightforward operation.
Supported by the built-in state-of-the-art technologies and knowledge, FM180 delivers unexceptional fast, stable, and error-free weighing results at all times.

Approved Functions:
 Weighing and Simple Counting
 Single and Dual Weighing Range
 Memory Accumulation
 Pre-set Tare
 Gross/Net Indicator
 Weighing Range Indicator
 Memory Indicator
 Standard and User Programmable Print Format
 Ticket and Label Printing 

Key Features:
 24-bit Low-Noise Delta to Sigma to Delta (Δ-Σ) Analog-to-Digital Converter
 Support Single or Dual Weighing Range Mode
 Free Capacity and Division Setting
 kg & lb Conversion (Single Weighing Range Mode only)
 True 6-wire (with Remote Sense) Load Cell Compensation System
 Real-Time Clock
 Linearity Compensation ON or OFF
 Independent Zero Calibration
 User selectable dot or comma for decimal point
 Calibration and Metrological Control / Access by Hardware or Software
 Non-Resettable Trailer Count to Record Calibration and Metrology Parameters Changes.
 Gravity Compensation via Key Board
 6 x 28mm Wide Angle LCD Numeric Digits
 1 x RS232 Output Port, Rechargeable Battery, Backlight, Pillar Mount Holder (ψ35~38mm), and Universal Power Adaptor Included

Options:
 WM-EP Wireless Communication Module
 Blue-tooth - 2.0,4.0 Wireless Communication Module
 Stainless Steel Wall/Desk Mount Holder
 SP-POS58EZ Thermal Printer
 RD-DOT Dot Matrix Remote Display
 LP-50 Label Printer

XSB Series Platform:
Quality, Structural Strength & Accuracy are Safeguarded by:
1. Material Grade
2. Material Thickness
3. Tooling & Method used to handle Material Cutting, Blending … etc.
4. Smart & CNC Made Oversized Heavy Duty Load Cell Supporting & Mounting Blocks
5. Strict Construction Accuracy Standards Applied
6. Smart & High-Quality Stainless Steel Junction Box used
7. OIML / NTEP C3 Approved or FM Special Grade Load Cell
8. High-Density Channel Frame Allocation
9. High-Quality Epoxy Coating Option

Key Features
1. Extremely Rigid Structural Steel Channel Frame Specifically Designed for Heavy Traffic
2. Super Strong Channel Frame Provides Extra Protection by Enclosing the Load Cells, Cable, and Junction Box Inside and away from Chemicals and Other Industrial Elements
3. Heavy-Duty Industrial design Threaded Eyebolt Holes for Easy Lifting
4. Top-of-Floor or In-Floor Mounting
5. Swivel Adjustable Feet Eliminate Weighing Errors due to Misalignment
6. Construction Accuracy: - Better than 0.25%

Option
1. Mild Steel Ramp
2. Pit Installation Frame

Order Code
Model No.: - Nominal Capacity - Load Cell Type. Examples -
1.  XSB-1010-1T-A for platform size = 1 x 1m; nominal capacity = 500kg; with approved load cells.
2. XSB-1215-2T-N for platform size = 1.2 x 1.5m; nominal capacity = 2000kg; with FM Special Grade load cells.

FM18 rewrites the requirements of being a powerful indicator. It contains nearly all the features and functions that static and simple dynamic industrial weighing applications need. Equipped with a 24-bit Low-Noise Δ-Σ Analog-to-Digital Converter, special linearity compensation method plus all other state-of-the-art technologies applied. These enable
FM18 to provide fast, stable, and almost error-free weighing results anytime when needed. True 6-wire load cell compensation system, easy drive up to 8 x 350 Ω, runs at 1.6 million internal counts plus all the built-in functions, these are the foundation that makes FM18 good for nearly all static and mid to low-speed dynamic weighing applications.

Functions:
 Weighing
 Check weighing Function
 Piece Count Mode with Check Function
 Percentage Mode with Check Function
 Animal Weighing
 User Programmable Check Functions Buzzer Output
 Memory Accumulation
 Pre-set Tare
 Independent and User Programmable Print Format for Weighing, Piece Count, Percentage Mode
 Independent and User Programmable Data Format for Check weighing, Piece Checking, Percentage Checking
 Built-in Inflow and Outflow Control Logic
 Built-in Near Zero Logic for Dynamic Weighing Applications
 Support Ticket and Label Printing
 Support Q&A with other Peripherals
 Support Direct Control by External Peripheral

KEY FEATURES:
 24-bit Low-Noise Delta to Sigma to Delta (Δ-Σ) Analog-to-Digital Converter
 Support Single or Dual Weighing Range Mode
 Free Capacity and Division Setting
 kg & lb Conversion (Single Weighing Range Mode only)
 True 6-wire (with Remote Sense) Load Cell Compensation System
 Power up to 8 x 350Ω Load Cells or 16 x 700Ω Load Cells
 Supports 4-wire and 6-wire Load Cell Connections
 Real-Time Clock
 Linearity Compensation ON or OFF
 Independent Zero Calibration.
 Auto or User Programmable Odd Weight Calibration
 Calibration and Metrological Control / Access by Hardware or Software
 Non-Resettable Trailer Count to Record Calibration and Metrology Parameters Changes.
 Gravity Compensation via Keyboard
 6 x 1-inch Wide Angle LCD Numeric Digits
 Capacity Tracking Bar to Show Applied & Remaining Weighing Capacity
 Battery Protection Features and Circuits
 Equipped with RS232, TTL Relay Output, Wireless Communication Interfaces/TTL RS232
 Backlight, Rechargeable Battery, Power Adaptor, and Pillar (ψ35~38mm) Mount Holder Included

OPTIONS:
 RELAY-4, 4-Channels Relay Module
 WM Wireless Communication Module
 Stainless Steel Wall/Desk Mount Holder
 SP-POS58EZ Thermal Printer
 RD-DOT Dot Matrix Remote Display
 LP-50 Label Printer

XSB Series Platform:
Quality, Structural Strength & Accuracy are Safeguarded by:
1. Material Grade
2. Material Thickness
3. Tooling & Method used to handle Material Cutting, Blending … etc.
4. Smart & CNC Made Oversized Heavy Duty Load Cell Supporting & Mounting Blocks
5. Strict Construction Accuracy Standards Applied
6. Smart & High-Quality Stainless Steel Junction Box used
7. OIML / NTEP C3 Approved or FM Special Grade Load Cell
8. High-Density Channel Frame Allocation
9. High-Quality Epoxy Coating Option

Key Features
1. Extremely Rigid Structural Steel Channel Frame Specifically Designed for Heavy Traffic
2. Super Strong Channel Frame Provides Extra Protection by Enclosing the Load Cells, Cable, and Junction Box Inside and away from Chemicals and Other Industrial Elements
3. Heavy-Duty Industrial design Threaded Eyebolt Holes for Easy Lifting
4. Top-of-Floor or In-Floor Mounting
5. Swivel Adjustable Feet Eliminate Weighing Errors due to Misalignment
6. Construction Accuracy: - Better than 0.25%

Option
1. Mild Steel Ramp
2. Pit Installation Frame

Order Code
Model No.: - Nominal Capacity - Load Cell Type. Examples -
1.  XSB-1010-1T-A for platform size = 1 x 1m; nominal capacity = 500kg; with approved load cells.
2. XSB-1215-2T-N for platform size = 1.2 x 1.5m; nominal capacity = 2000kg; with FM Special Grade load cells.

Independently Configurable Function Modes:
 Static & Dynamic Weighing
 Piece Counting
 Action-Tare-Memory (ATM)
 Peak Measuring
 Grading and sorting up to 10 Set Points and 8 Grades
 Checking Functions for Weighing, Piece Counting, ATM, Grading, and Sorting Function

Displays and Indications:
 1 Primary plus 2 Secondary Displays provide Clear Information about Results, Settings, and the Next Target Value of the Current Operation
 Tri-Color Check Result Light Bars Present Pinpoint Accuracy about where and how far the Current Weight is and away from the Target Value
 Zero, Net, Weight Unit, Memory, Low Battery, Relay Output, and Charge Status Indicators

Built-In Control Logic:
 Static and Dynamic Check
 Inflow and Outflow Control
 Constant Feeding
 Constant Dispensing with Auto Refilling,
 Dual Speed Filling
 Batching up to 8 Ingredients
 Dual Speed Discharge
 Discharge and Refill
 User Programmable Logic for each and individual Relay Output

Connectivity:
 Maximum 4 independent configurable comports. Maximum Baud Rate = 921600
 Hardwire Connection Types (standard) include RS232, RS485, and TTL
 Wireless Communication Types (optional) include Bluetooth 2.0 /4.0 and WIFI
 Optional isolated RS232 to Ensure High-Speed Data Communication even in a High Interference Environment
 Optional Built-in 8-Channel Control Relay Board.

Operation Features:
 Primary and Secondary Displays: -
 Display #1: - 6 x 25mm LED Numeric Digits
 Display #2: - 6 x 10mm LED Numeric Digits
 Display #3: - 6 x 10mm LED Numeric Digits
 Support Single Range, Dual Range, and Dual Interval Operation 
 Support both Tension and Compression Load / Force Direction
 Near Zero Weight Value for Dynamic Weighing to avoid False Signal Output
 Repetitive and Continuous Tare Operation
 Continuous Tare with Configurable Delay Time before Tare Action
 Real-Time Clock with Backup Battery
 Watchdog System to Prevent Damages Caused by Load Cell Short-circuit. 
 Configurable Tri-Color Check Result Light Bar
 Configurable Keypad, Check & System Buzzer

Management Features
 130000 Non-Resettable Transaction Memory
 Daily, Monthly, specific Period Report Output
 Multi-Search Criteria for Report Generation
 Configurable Machine ID, Machine Group, and Operator Number to Enhance Ease of Multi
 Scales Applications and Management Records
 Customer & Product Code Input through a Serial Scanner, Keypad, or Barcode Reader
 Customer & Product Code Support Numbers, Alphabets, and Selected Symbols
 Quick Access PLUs for Weight Limits, Quantity Limits, and Preset Tare Values
 Direct PLUs for Customer & Product Codes
 Check Result Control for Accumulation, Data Printout & Data Output
 Keypad Lock Function
 Support Inquiry, Setting, and Execution Commands from PC
 All Current Operation Results Output in Data Base Format Increases Ease & Efficiency of Data Management, Processing & Analysis
 Support Ticket Printer and Label Printer (Dates LP-50 & TSC TDP-225, TDP-247, TDP-345, TTP225, TTP-247, TTP-345)
 Selectable Portrait / Landscape Ticket Printout Format
 10 x Built-in Predefined Continuous / Internal Output Protocol
 User Programmable Continuous / Internal Output Protocol 

Apps for Smart Phones & Devices
iOS App (i19) & Android App (a19) are available for free download at App Store and Google Play respectively. Both Apps support connection via 
Bluetooth and WIFI. These Apps are so powerful that they turn your smart devices into a handheld terminal, remote display, remote data input center, and controller of your FM product connected.

End User PC Software 
 Freeware Specially Created to Support End Users
 Real-Time Operation Status Monitoring 
 Operation Parameters Setting
 Real-Time Process Monitoring
 Individual and Totalized Record Storage 
 Database File Output

Options
 Stainless Steel Wall/Desk Mount Holder
 SP-POS58IV & SP-POS88IV Thermal Ticket Printer
 LP-50, TDP-225, TTP-225, TTP-247, TTP-345 Label Printer
 Serial Barcode Reader
 WM Wireless Communication Module
 RD-DOT Dot Matrix Remote Display
 Bluetooth 4.0BLE Module
 Bluetooth 2.0 Module
 Isolated RS232
 Built-in 8-Channel Control Relay Board (Factory Installation)
 WIFI Module
 DPP-250 Bluetooth Thermal Printer

K Series Scale:
Key Features:
 #304 Stainless Steel Construction, Platter, and Pillar (Optional) 
 Equipped with OIML C3 Approved 17-4PH Stainless Steel Load Cell 
 Complete Sealed Design, to Prevent Liquid Penetrate into Platform Structure
 Rugged Structure for Harsh and Rugged Environment
 Overload Protection Devices to Withstand Shock and Overloads 
 Safe Overload = 150% plus 
 Ultimate Overload = 200% plus Adjustable Feet and Bubble Level Included