Fidelity Measurement

FEATURES:
 24 Bit Sigma to Delta (Σ-Δ) Analog-To-Digital Converter
 Multi Functions Indicator
 Free Capacity and Division Setting
 6 x 1-Inch Numeric Digits
 Tracking Bar to Show Applied & Remaining Capacity
 Calibration Password Control
 Power Up To 4 X 350Ω Load Cells or 8 X 700Ω Load Cells
 Dual Power Source: - By Built-In Rechargeable Battery or External Power Adaptor
 Lower Power Consumption. Battery Operating Time = 200 Hours plus
 Built-in Real Time Clock
 Backlight, Built-In Rechargeable Battery, External Power Adaptor, and Stainless-Steel Wall/Desk Mount Holder Included

USER SELECTABLE PARAMETERS: 
 5 x Filter Intensity Mode
 3 x Backlight Mode
 2 x Selectable Auto Tare Function
 5 x RS232 Data Output Baud Rate
 7 x Initial Zero Range
 6 x Manual Zero Range
 4 x Auto Zero Tracking Range
 3 x Check weighing Buzzer Output Mode

FUNCTIONS:
 Weighing
 Check to weigh
 Animal Weighing
 Piece Count
 Pre-set Tare
 Memory Accumulation
 Kg/lb Conversion Function plus 2 x User Programmable Weight Units
 Auto Initial Zero Tracking
 Manual Zero 

K Series Scale:
Key Features:
 #304 Stainless Steel Construction, Platter, and Pillar (Optional) 
 Equipped with OIML C3 Approved 17-4PH Stainless Steel Load Cell 
 Complete Sealed Design, to Prevent Liquid Penetrate into Platform Structure
 Rugged Structure for Harsh and Rugged Environment
 Overload Protection Devices to Withstand Shock and Overloads 
 Safe Overload = 150% plus 
 Ultimate Overload = 200% plus Adjustable Feet and Bubble Level Included

FEATURES:
 24 Bit Sigma to Delta (Σ-Δ) Analog-To-Digital Converter
 Multi Functions Indicator
 Free Capacity and Division Setting
 6 x 1-Inch Numeric Digits
 Tracking Bar to Show Applied & Remaining Capacity
 Calibration Password Control
 Power Up To 4 X 350Ω Load Cells or 8 X 700Ω Load Cells
 Dual Power Source: - By Built-In Rechargeable Battery or External Power Adaptor
 Lower Power Consumption. Battery Operating Time = 200 Hours plus
 Built-in Real Time Clock
 Backlight, Built-In Rechargeable Battery, External Power Adaptor, and Stainless-Steel Wall/Desk Mount Holder Included

USER SELECTABLE PARAMETERS: 
 5 x Filter Intensity Mode
 3 x Backlight Mode
 2 x Selectable Auto Tare Function
 5 x RS232 Data Output Baud Rate
 7 x Initial Zero Range
 6 x Manual Zero Range
 4 x Auto Zero Tracking Range
 3 x Check weighing Buzzer Output Mode

FUNCTIONS:
 Weighing
 Check to weigh
 Animal Weighing
 Piece Count
 Pre-set Tare
 Memory Accumulation
 Kg/lb Conversion Function plus 2 x User Programmable Weight Units
 Auto Initial Zero Tracking
 Manual Zero 

K Series Scale:
Key Features:
 #304 Stainless Steel Construction, Platter, and Pillar (Optional) 
 Equipped with OIML C3 Approved 17-4PH Stainless Steel Load Cell 
 Complete Sealed Design, to Prevent Liquid Penetrate into Platform Structure
 Rugged Structure for Harsh and Rugged Environment
 Overload Protection Devices to Withstand Shock and Overloads 
 Safe Overload = 150% plus 
 Ultimate Overload = 200% plus Adjustable Feet and Bubble Level Included

FM180, OIML 10,000e approved weighing indicator specially designed for static weighing and simple counting tasks. The 7 function keys provide easy, fast, direct, and straightforward operation.
Supported by the built-in state-of-the-art technologies and knowledge, FM180 delivers unexceptional fast, stable, and error-free weighing results at all times.

Approved Functions:
 Weighing and Simple Counting
 Single and Dual Weighing Range
 Memory Accumulation
 Pre-set Tare
 Gross/Net Indicator
 Weighing Range Indicator
 Memory Indicator
 Standard and User Programmable Print Format
 Ticket and Label Printing 

Key Features:
 24-bit Low-Noise Delta to Sigma to Delta (Δ-Σ) Analog-to-Digital Converter
 Support Single or Dual Weighing Range Mode
 Free Capacity and Division Setting
 kg & lb Conversion (Single Weighing Range Mode only)
 True 6-wire (with Remote Sense) Load Cell Compensation System
 Real-Time Clock
 Linearity Compensation ON or OFF
 Independent Zero Calibration
 User selectable dot or comma for decimal point
 Calibration and Metrological Control / Access by Hardware or Software
 Non-Resettable Trailer Count to Record Calibration and Metrology Parameters Changes.
 Gravity Compensation via Key Board
 6 x 28mm Wide Angle LCD Numeric Digits
 1 x RS232 Output Port, Rechargeable Battery, Backlight, Pillar Mount Holder (ψ35~38mm), and Universal Power Adaptor Included

K Series Scale:
Key Features:
 #304 Stainless Steel Construction, Platter and Pillar (Optional) 
 Equipped with OIML C3 Approved 17-4PH Stainless Steel Load Cell 
 Complete Sealed Design, to Prevent Liquid Penetrate into Platform Structure
 Rugged Structure for Harsh and Rugged Environment
 Overload Protection Devices to Withstand Shock and Overloads 
 Safe Overload = 150% plus 
 Ultimate Overload = 200% plus Adjustable Feet and Bubble Level Included

Options:
 WM-EP Wireless Communication Module
 Blue-tooth - 2.0 ,4.0 Wireless Communication Module
 Stainless Steel Wall/Desk Mount Holder
 SP-POS58EZ Thermal Printer
 RD-DOT Dot Matrix Remote Display
 LP-50 Label Printer

FM18 rewrites the requirements of being a powerful indicator. It contains nearly all the features and functions that static and simple dynamic industrial weighing applications need. Equipped with a 24-bit Low-Noise Δ-Σ Analog-to-Digital Converter, special linearity compensation method plus all other state-of-the-art technologies applied. These enable
FM18 to provide fast, stable, and almost error-free weighing results anytime when needed. True 6-wire load cell compensation system, easy drive up to 8 x 350 Ω, runs at 1.6 million internal counts plus all the built-in functions, these are the foundation that makes FM18 good for nearly all static and mid to low-speed dynamic weighing applications.

Functions:
 Weighing
 Check weighing Function
 Piece Count Mode with Check Function
 Percentage Mode with Check Function
 Animal Weighing
 User Programmable Check Functions Buzzer Output
 Memory Accumulation
 Pre-set Tare
 Independent and User Programmable Print Format for Weighing, Piece Count, Percentage Mode
 Independent and User Programmable Data Format for Check weighing, Piece Checking, Percentage Checking
 Built-in Inflow and Outflow Control Logic
 Built-in Near Zero Logic for Dynamic Weighing Applications
 Support Ticket and Label Printing
 Support Q&A with other Peripherals
 Support Direct Control by External Peripheral

KEY FEATURES:
 24 bit Low-Noise Delta to Sigma to Delta (Δ-Σ) Analog-to-Digital Converter
 Support Single or Dual Weighing Range Mode
 Free Capacity and Division Setting
 kg & lb Conversion (Single Weighing Range Mode only)
 True 6-wire (with Remote Sense) Load Cell Compensation System
 Power up to 8 x 350Ω Load Cells or 16 x 700Ω Load Cells
 Supports 4-wire and 6-wire Load Cell Connections
 Real Time Clock
 Linearity Compensation ON or OFF
 Independent Zero Calibration.
 Auto or User Programmable Odd Weight Calibration
 Calibration and Metrological Control / Access by Hardware or Software
 Non-Resettable Trailer Count to Record Calibration and Metrology Parameters Changes.
 Gravity Compensation via Keyboard
 6 x 1-inch Wide Angle LCD Numeric Digits
 Capacity Tracking Bar to Show Applied & Remaining Weighing Capacity
 Battery Protection Features and Circuits
 Equipped with RS232, TTL Relay Output, Wireless Communication Interfaces/TTL RS232
 Backlight, Rechargeable Battery, Power Adaptor and Pillar (ψ35~38mm) Mount Holder Included 

K - Series Platform:
Key Features:
 #304 Stainless Steel Construction, Platter and Pillar (Optional) 
 Equipped with OIML C3 Approved 17-4PH Stainless Steel Load Cell Complete 
 Sealed Design, to Prevent Liquid Penetrate into Platform Structure Rugged
 Structure for Harsh and Rugged Environment
 Overload Protection Devices to Withstand Shock and Overloads 
 Safe Overload = 150% plus
 Ultimate Overload = 200% plus Adjustable Feet and Bubble Level Included

OPTIONS:
 RELAY-4, 4-Channels Relay Module
 WM Wireless Communication Module
 Stainless Steel Wall/Desk Mount Holder
 SP-POS58EZ Thermal Printer
 RD-DOT Dot Matrix Remote Display
 LP-50 Label Printer

Quality, Structural Strength & Accuracy are Safeguarded by:
1. Material Grade
2. Material Thickness
3. Tooling & Method used to handle Material Cutting, Blending … etc.
4. Smart & CNC Made Oversized Heavy Duty Load Cell Supporting & Mounting Blocks
5. Strict Construction Accuracy Standards Applied
6. Smart & High-Quality Stainless Steel Junction Box used
7. OIML / NTEP C3 Approved or FM Special Grade Load Cell
8. High-Density Channel Frame Allocation
9. High-Quality Epoxy CoatingOption

Key Features
1. Extremely Rigid Structural Steel Channel Frame Specifically Designed for Heavy Traffic
2. Super Strong Channel Frame Provides Extra Protection by Enclosing the Load Cells, Cable and Junction Box Inside and away from Chemicals and Other Industrial Element
3. Heavy-Duty Industrial design Threaded Eyebolt Holes for Easy Lifting
4. Top-of-Floor or In-Floor Mounting
5. Swivel Adjustable Feet Eliminate Weighing Errors due to Misalignment
6. Construction Accuracy: - Better than 0.25%

Option
1. Mild Steel Ramp
2. Pit Installation Frame

Order Code
Model No.: - Nominal Capacity - Load Cell Type. Examples -
1.  XSB-1010-1T-A for platform size = 1 x 1m; nominal capacity = 500kg; with approved load cells.
2. XSB-1215-2T-N for platform size = 1.2 x 1.5m; nominal capacity = 2000kg; with FM Special Grade load cells.

Key Features

•  #304 Stainless Steel Construction, Platter, and Pillar (Optional)
• Equipped with OIML C3 Approved 17-4PH Stainless Steel Load Cell
• Complete Sealed Design, to Prevent Liquid Penetrate Platform Structure
• Rugged Structure for Harsh and Rugged Environment
• Overload Protection Devices to Withstand Shock and Overloads
• Safe Overload = 150% plus
• Ultimate Overload = 200% plus
• Adjustable Feet and Bubble Level Included

Options:

•  All Grade #304 Stainless Steel Pillar
• FM16S Stainless Steel Weighing Indicator