Yide Sensors Inc.

Short Description:
Aluminum-alloy IP65 single point load cell
Colourless anodized
Suitable for single and double load cells structured platform scales
Maximum platform size: 600 x 600 mm
A 1000 Ohm type available (R1) but is excluded from OIML
Manufacturer: Yide Sensors Inc.
Origin: Made in Australia

Available Capacity:

Capacity	Accuracy	Full Article Description
50kg	C3	NEA-50kg
100kg	C3	NEA-100kg
150kg	C3/C4	NEA-150kg
200kg	C3/C4	NEA-200kg
250kg	C3/C4	NEA-250kg
300kg	C3/C4	NEA-300kg
500kg	C3/C4	NEA-500kg

Technical Specifications of NEA

Accuracy Class		OIML R60 C3, OIML R60 C4
Output Sensitivity ( FS )	mV/V	2.0 ± 0.2
Maximum Capacity ( Emax )	kg	50, 100, 150, 200, 250, 300, 500, 600; 150, 200, 250, 300, 500, 600
Max. Number of Load Cell Intervals	nLC	3000, 4000
Ratio of min. LC Verification Interval	Y = Emax / Vmin	10000, 15000
Combined Error	%FS	≤± 0.02
Creep Error (30 minutes)	%FS	≤± 0.02
Temperature Effect on Zero (ZTC)	%FS/10°C	≤± 0.0230; ≤± 0.0175
Minimum dead load	Of Emax	0%
Safe overload	Of Emax	150 %
Ultimate Overload	Of Emax	300 %
Zero balance	Of FS	± 2.0 %
Excitation, Recommended Voltage	V	5 ~ 12
Excitation, Maximum Voltage	V	18
Input Resistance	Ω	750±6
Output Resistance	Ω	700±3
Insulation Resistance	MΩ	5000 (at 50VDC)
Compensated Temperature	°C	-10 ~ 40
Operating Temperature	°C	-35 ~ 65
Storage Temperature	°C	-40 ~ 70
Element Material		Aluminum
Ingress Protection (acc. to EN 60529)		IP65
Recommended Torque on Fixation Bolts	Nm	M8:25

Wiring:
Shielded, 6 conductor cable
Cable diameter: Ø6mm
Cable length: 3m
Shield connected to element
Cable jacket in PVC

Wiring Instruction:
Input(Positive) - Red
Output(Positive) - Green
Output(Negative) - Blue
Input(Negative) - Yellow

Short Description:
Nickel plated alloy steel IP66 single point load cell
Bending beam
Suitable for belt, platform and other electronic weighing devices
Maximum platform size:
1. for 50kg-200kg: 400 x 400 mm
2. for 250kg-500kg: 600 x 800 mm
3. for 750kg-2t: 1200 x 1200 mm
Manufacturer: Yide Sensors Inc.
Origin: Made in Australia

Available Models:

Capacity	Accuracy	Full Article Description
100kg	C3	UH62-C3-100kg-3B6
150kg	C3	UH62-C3-150kg-3B6
200kg	C3	UH62-C3-200kg-3B6
250kg	C3	UH62-C3-250kg-3B6
500kg	C3	UH62-C3-500kg-3B6
750kg	C3	UH62-C3-750kg-3B6
1000kg	C3	UH62-C3-1000kg-3B6
2000kg	C3	UH62-C3-2000kg-3B6

Technical Specifications of UH62

Accuracy Class		C3
Output Sensitivity ( FS )	mV/V	2.0 ± 0.2
Maximum Capacity ( Emax )	Kg	100, 150, 200, 250, 500, 750, 1000, 2000
Max. Number of Load Cell Intervals	nLC	3000
Ratio of min. LC Verification Interval	Y = Emax / Vmin	7500
Combined Error	%FS	≤± 0.020
Minimum dead load	Of Emax	0%
Safe overload	Of Emax	150 %
Ultimate overload300 %	Of Emax	300 %
Zero balance	Of FS	< ± 1.0 %
Excitation, recommended voltage	V	5 ~ 12
Excitation maximum	V	18
Input Resistance	Ω	406 ± 3
Output Resistance	Ω	350 ± 3
Insulation Resistance	MΩ	≥5000 (at 50VDC)
Compensated Temperature	°C	-10 ~ 40
Operating Temperature	°C	-35 ~ 65
Storage Temperature	°C	-40 ~ 70
Element Material		Nickel plated alloy steel
Ingress Protection (acc. to EN 60529)		IP66
Recommended Torque on Fixation Bolts	Nm	M12:75; M16:200
ATEX Classification (optional)		II1G Ex ia II1C T4 II1D Ex iaD 20 T73°C II3G nL IIC T4

Wiring:
Shielded, 6 conductor cable
Cable diameter: Ø6.2mm
Standard cable length: 3m
Shield not connected to element

Wiring Instruction:

Input (Positive) - White Sense (Positive) - Brown Output (Positive) - Red Output (Negative) - Black Sense (Negative) - Green Input (Negative) - Yellow

Dimension Wise Capacity:

Dimension Capacity	B	B1	H	H1	H2	L	L1	L2	M
50-200kg	44	24	75	50	30	156	112	14	M12
250-500kg	60	36	95	70	30	146	110	11	M12
750kg-2000kg	76	46	125	95	65	176	110	24	M16