Search

FUNCTIONS
1. Weighing
2. Check weighing Function
3. Piece Count Mode with Check Function
4. Percentage Mode with Check Function
5. Animal Weighing
6. User Programmable Check Functions Buzzer Output
7. Memory Accumulation
8. Pre-set Tare
9. Independent and User Programmable Print Format for Weighing, Piece Count, Percentage Mode 
10. Independent and User Programmable Data Format for Check weighing, Piece Checking, Percentage Checking
11. Built-in Inflow and Outflow Control Logic
12. Built-in Near Zero Logic for Dynamic Weighing 

Applications
1. Support Ticket and Label Printing
2. Support Q&A with other Peripherals
3. Support Direct Control by External Peripheral
4. User Selectable Parameters: -
5. 6 x Auto Power Off Time
6. 4 x Filter Intensity Mode
7. 3 x Backlight Mode
8. 2 x Selectable Auto Tare Function
9. 4 x RS232 Data Output Baud Rate 
10. 4 x Output Mode
11. 3 x Data Format
12. 3 x M Mode
13. 3 x Data Output Mode
14. 4 x Data Transmission Time Interval 
15. 8 x Number of Print Copy
16. 6 x Output Band Rate
17. 7 x Initial Zero Range
18. 7 x Manual Zero Range
19. 6 x Auto Zero Tracking Range
20. Bi-Directional Communication through RS232 or TTL Interface

KEY FEATURES
1. 24 bit Low-Noise Delta to Sigma to Delta (Δ-Σ) Analog-to-Digital Converter
2. Support Single or Dual Weighing Range Mode
3. Free Capacity and Division Setting 
4. kg & lb Conversion (Single Weighing Range Mode only)
5. True 6-wire (with Remote Sense) Load Cell Compensation System
6. Power up to 8 x 350Ω Load Cells or 16 x 700Ω Load Cells
7. Supports 4-wire and 6-wire Load Cell Connections
8. Real Time Clock
9. Linearity Compensation ON or OFF
10. Independent Zero Calibration.
11. Auto or User Programmable Odd Weight Calibration
12. Calibration and Metrological Control / Access by Hardware or Software
13. Non-Resettable Trailer Count to Record Calibration and Metrology Parameters Changes.
14. Gravity Compensation via Keyboard
15. 6 x 1-inch Wide Angle LCD Numeric Digits
16. Capacity Tracking Bar to Show Applied & Remaining Weighing Capacity
17. Battery Protection Features and Circuits
18. Equipped with RS232, TTL Relay Output, Wireless Communication Interfaces/TTL RS232
19. Backlight, Rechargeable Battery, Power Adaptor and Pillar (ψ35~38mm) Mount Holder Included 

OPTIONS
1. RELAY-4, 4-Channels Relay Module
2. WM Wireless Communication Module
3. Stainless Steel Wall/Desk Mount Holder
4. SP-POS58EZ Thermal Printer
5. RD-DOT Dot Matrix Remote Display
6. LP-50 Label Printer

Approved Functions
 Weighing and Simple Counting
 Single and Dual Weighing Range
 Memory Accumulation
 Pre-set Tare
 Gross/Net Indicator
 Weighing Range Indicator
 Memory Indicator
 Standard and User Programmable Print 

Format 
 Ticket and Label Printing
User Selectable Parameters
 6 x Auto Power Off Time
 4 x Filter Intensity Mode
 3 x Backlight Mode
 3 x RS232 Data Output Baud Rate 
 3 x Data Format
 3 x M Mode
 3 x Data Output Mode
 4 x Data Transmission Time Interval 
 7 x Initial Zero Range
 7 x Manual Zero Range

Key Features
 24 bit Low-Noise Delta to Sigma to Delta (Δ-Σ) 
Analog-to-Digital Converter
 Support Single or Dual Weighing Range Mode
 Free Capacity and Division Setting 
 kg & lb Conversion (Single Weighing Range 
Mode only)
 True 6-wire (with Remote Sense) Load Cell Compensation System
 Real Time Clock
 Linearity Compensation ON or OFF
 Independent Zero Calibration
 User selectable dot or comma for decimal point
 Calibration and Metrological Control / Access by Hardware or Software
 Non-Resettable Trailer Count to Record Calibration and Metrology Parameters Changes.
 Gravity Compensation via Key Board
 6 x 28mm Wide Angle LCD Numeric Digits
 1 x RS232 Output Port, Rechargeable Battery, Backlight, Pillar Mount Holder (ψ35~38mm) and Universal Power Adaptor Included

Options
 WM-EP Wireless Communication Module
 Stainless Steel Wall/Desk Mount Holder
 SP-POS58EZ Thermal Printer
 RD-DOT Dot Matrix Remote Display
 LP-50 Label Printer

FM180, OIML 10,000e approved weighing indicator specially designed for static weighing and simple counting tasks. The 7 function keys provide easy, fast, direct, and straightforward operation.
Supported by the built-in state-of-the-art technologies and knowledge, FM180 delivers unexceptional fast, stable, and error-free weighing results at all times.

Approved Functions:
 Weighing and Simple Counting
 Single and Dual Weighing Range
 Memory Accumulation
 Pre-set Tare
 Gross/Net Indicator
 Weighing Range Indicator
 Memory Indicator
 Standard and User Programmable Print Format
 Ticket and Label Printing 

Key Features:
 24-bit Low-Noise Delta to Sigma to Delta (Δ-Σ) Analog-to-Digital Converter
 Support Single or Dual Weighing Range Mode
 Free Capacity and Division Setting
 kg & lb Conversion (Single Weighing Range Mode only)
 True 6-wire (with Remote Sense) Load Cell Compensation System
 Real-Time Clock
 Linearity Compensation ON or OFF
 Independent Zero Calibration
 User selectable dot or comma for decimal point
 Calibration and Metrological Control / Access by Hardware or Software
 Non-Resettable Trailer Count to Record Calibration and Metrology Parameters Changes.
 Gravity Compensation via Key Board
 6 x 28mm Wide Angle LCD Numeric Digits
 1 x RS232 Output Port, Rechargeable Battery, Backlight, Pillar Mount Holder (ψ35~38mm), and Universal Power Adaptor Included

Options:
 WM-EP Wireless Communication Module
 Blue-tooth - 2.0,4.0 Wireless Communication Module
 Stainless Steel Wall/Desk Mount Holder
 SP-POS58EZ Thermal Printer
 RD-DOT Dot Matrix Remote Display
 LP-50 Label Printer

XSB Series Platform:
Quality, Structural Strength & Accuracy are Safeguarded by:
1. Material Grade
2. Material Thickness
3. Tooling & Method used to handle Material Cutting, Blending … etc.
4. Smart & CNC Made Oversized Heavy Duty Load Cell Supporting & Mounting Blocks
5. Strict Construction Accuracy Standards Applied
6. Smart & High-Quality Stainless Steel Junction Box used
7. OIML / NTEP C3 Approved or FM Special Grade Load Cell
8. High-Density Channel Frame Allocation
9. High-Quality Epoxy Coating Option

Key Features
1. Extremely Rigid Structural Steel Channel Frame Specifically Designed for Heavy Traffic
2. Super Strong Channel Frame Provides Extra Protection by Enclosing the Load Cells, Cable, and Junction Box Inside and away from Chemicals and Other Industrial Elements
3. Heavy-Duty Industrial design Threaded Eyebolt Holes for Easy Lifting
4. Top-of-Floor or In-Floor Mounting
5. Swivel Adjustable Feet Eliminate Weighing Errors due to Misalignment
6. Construction Accuracy: - Better than 0.25%

Option
1. Mild Steel Ramp
2. Pit Installation Frame

Order Code
Model No.: - Nominal Capacity - Load Cell Type. Examples -
1.  XSB-1010-1T-A for platform size = 1 x 1m; nominal capacity = 500kg; with approved load cells.
2. XSB-1215-2T-N for platform size = 1.2 x 1.5m; nominal capacity = 2000kg; with FM Special Grade load cells.

FM18 rewrites the requirements of being a powerful indicator. It contains nearly all the features and functions that static and simple dynamic industrial weighing applications need. Equipped with a 24-bit Low-Noise Δ-Σ Analog-to-Digital Converter, special linearity compensation method plus all other state-of-the-art technologies applied. These enable
FM18 to provide fast, stable, and almost error-free weighing results anytime when needed. True 6-wire load cell compensation system, easy drive up to 8 x 350 Ω, runs at 1.6 million internal counts plus all the built-in functions, these are the foundation that makes FM18 good for nearly all static and mid to low-speed dynamic weighing applications.

Functions:
 Weighing
 Check weighing Function
 Piece Count Mode with Check Function
 Percentage Mode with Check Function
 Animal Weighing
 User Programmable Check Functions Buzzer Output
 Memory Accumulation
 Pre-set Tare
 Independent and User Programmable Print Format for Weighing, Piece Count, Percentage Mode
 Independent and User Programmable Data Format for Check weighing, Piece Checking, Percentage Checking
 Built-in Inflow and Outflow Control Logic
 Built-in Near Zero Logic for Dynamic Weighing Applications
 Support Ticket and Label Printing
 Support Q&A with other Peripherals
 Support Direct Control by External Peripheral

KEY FEATURES:
 24-bit Low-Noise Delta to Sigma to Delta (Δ-Σ) Analog-to-Digital Converter
 Support Single or Dual Weighing Range Mode
 Free Capacity and Division Setting
 kg & lb Conversion (Single Weighing Range Mode only)
 True 6-wire (with Remote Sense) Load Cell Compensation System
 Power up to 8 x 350Ω Load Cells or 16 x 700Ω Load Cells
 Supports 4-wire and 6-wire Load Cell Connections
 Real-Time Clock
 Linearity Compensation ON or OFF
 Independent Zero Calibration.
 Auto or User Programmable Odd Weight Calibration
 Calibration and Metrological Control / Access by Hardware or Software
 Non-Resettable Trailer Count to Record Calibration and Metrology Parameters Changes.
 Gravity Compensation via Keyboard
 6 x 1-inch Wide Angle LCD Numeric Digits
 Capacity Tracking Bar to Show Applied & Remaining Weighing Capacity
 Battery Protection Features and Circuits
 Equipped with RS232, TTL Relay Output, Wireless Communication Interfaces/TTL RS232
 Backlight, Rechargeable Battery, Power Adaptor, and Pillar (ψ35~38mm) Mount Holder Included

OPTIONS:
 RELAY-4, 4-Channels Relay Module
 WM Wireless Communication Module
 Stainless Steel Wall/Desk Mount Holder
 SP-POS58EZ Thermal Printer
 RD-DOT Dot Matrix Remote Display
 LP-50 Label Printer

XSB Series Platform:
Quality, Structural Strength & Accuracy are Safeguarded by:
1. Material Grade
2. Material Thickness
3. Tooling & Method used to handle Material Cutting, Blending … etc.
4. Smart & CNC Made Oversized Heavy Duty Load Cell Supporting & Mounting Blocks
5. Strict Construction Accuracy Standards Applied
6. Smart & High-Quality Stainless Steel Junction Box used
7. OIML / NTEP C3 Approved or FM Special Grade Load Cell
8. High-Density Channel Frame Allocation
9. High-Quality Epoxy Coating Option

Key Features
1. Extremely Rigid Structural Steel Channel Frame Specifically Designed for Heavy Traffic
2. Super Strong Channel Frame Provides Extra Protection by Enclosing the Load Cells, Cable, and Junction Box Inside and away from Chemicals and Other Industrial Elements
3. Heavy-Duty Industrial design Threaded Eyebolt Holes for Easy Lifting
4. Top-of-Floor or In-Floor Mounting
5. Swivel Adjustable Feet Eliminate Weighing Errors due to Misalignment
6. Construction Accuracy: - Better than 0.25%

Option
1. Mild Steel Ramp
2. Pit Installation Frame

Order Code
Model No.: - Nominal Capacity - Load Cell Type. Examples -
1.  XSB-1010-1T-A for platform size = 1 x 1m; nominal capacity = 500kg; with approved load cells.
2. XSB-1215-2T-N for platform size = 1.2 x 1.5m; nominal capacity = 2000kg; with FM Special Grade load cells.

FM180, OIML 10,000e approved weighing indicator specially designed for static weighing and simple counting tasks. The 7 function keys provide easy, fast, direct, and straightforward operation.
Supported by the built-in state-of-the-art technologies and knowledge, FM180 delivers unexceptional fast, stable, and error-free weighing results at all times.

Approved Functions:
 Weighing and Simple Counting
 Single and Dual Weighing Range
 Memory Accumulation
 Pre-set Tare
 Gross/Net Indicator
 Weighing Range Indicator
 Memory Indicator
 Standard and User Programmable Print Format
 Ticket and Label Printing 

Key Features:
 24-bit Low-Noise Delta to Sigma to Delta (Δ-Σ) Analog-to-Digital Converter
 Support Single or Dual Weighing Range Mode
 Free Capacity and Division Setting
 kg & lb Conversion (Single Weighing Range Mode only)
 True 6-wire (with Remote Sense) Load Cell Compensation System
 Real-Time Clock
 Linearity Compensation ON or OFF
 Independent Zero Calibration
 User selectable dot or comma for decimal point
 Calibration and Metrological Control / Access by Hardware or Software
 Non-Resettable Trailer Count to Record Calibration and Metrology Parameters Changes.
 Gravity Compensation via Key Board
 6 x 28mm Wide Angle LCD Numeric Digits
 1 x RS232 Output Port, Rechargeable Battery, Backlight, Pillar Mount Holder (ψ35~38mm), and Universal Power Adaptor Included

K Series Scale:
Key Features:
 #304 Stainless Steel Construction, Platter and Pillar (Optional) 
 Equipped with OIML C3 Approved 17-4PH Stainless Steel Load Cell 
 Complete Sealed Design, to Prevent Liquid Penetrate into Platform Structure
 Rugged Structure for Harsh and Rugged Environment
 Overload Protection Devices to Withstand Shock and Overloads 
 Safe Overload = 150% plus 
 Ultimate Overload = 200% plus Adjustable Feet and Bubble Level Included

Options:
 WM-EP Wireless Communication Module
 Blue-tooth - 2.0 ,4.0 Wireless Communication Module
 Stainless Steel Wall/Desk Mount Holder
 SP-POS58EZ Thermal Printer
 RD-DOT Dot Matrix Remote Display
 LP-50 Label Printer

FM18 rewrites the requirements of being a powerful indicator. It contains nearly all the features and functions that static and simple dynamic industrial weighing applications need. Equipped with a 24-bit Low-Noise Δ-Σ Analog-to-Digital Converter, special linearity compensation method plus all other state-of-the-art technologies applied. These enable
FM18 to provide fast, stable, and almost error-free weighing results anytime when needed. True 6-wire load cell compensation system, easy drive up to 8 x 350 Ω, runs at 1.6 million internal counts plus all the built-in functions, these are the foundation that makes FM18 good for nearly all static and mid to low-speed dynamic weighing applications.

Functions:
 Weighing
 Check weighing Function
 Piece Count Mode with Check Function
 Percentage Mode with Check Function
 Animal Weighing
 User Programmable Check Functions Buzzer Output
 Memory Accumulation
 Pre-set Tare
 Independent and User Programmable Print Format for Weighing, Piece Count, Percentage Mode
 Independent and User Programmable Data Format for Check weighing, Piece Checking, Percentage Checking
 Built-in Inflow and Outflow Control Logic
 Built-in Near Zero Logic for Dynamic Weighing Applications
 Support Ticket and Label Printing
 Support Q&A with other Peripherals
 Support Direct Control by External Peripheral

KEY FEATURES:
 24 bit Low-Noise Delta to Sigma to Delta (Δ-Σ) Analog-to-Digital Converter
 Support Single or Dual Weighing Range Mode
 Free Capacity and Division Setting
 kg & lb Conversion (Single Weighing Range Mode only)
 True 6-wire (with Remote Sense) Load Cell Compensation System
 Power up to 8 x 350Ω Load Cells or 16 x 700Ω Load Cells
 Supports 4-wire and 6-wire Load Cell Connections
 Real Time Clock
 Linearity Compensation ON or OFF
 Independent Zero Calibration.
 Auto or User Programmable Odd Weight Calibration
 Calibration and Metrological Control / Access by Hardware or Software
 Non-Resettable Trailer Count to Record Calibration and Metrology Parameters Changes.
 Gravity Compensation via Keyboard
 6 x 1-inch Wide Angle LCD Numeric Digits
 Capacity Tracking Bar to Show Applied & Remaining Weighing Capacity
 Battery Protection Features and Circuits
 Equipped with RS232, TTL Relay Output, Wireless Communication Interfaces/TTL RS232
 Backlight, Rechargeable Battery, Power Adaptor and Pillar (ψ35~38mm) Mount Holder Included 

K - Series Platform:
Key Features:
 #304 Stainless Steel Construction, Platter and Pillar (Optional) 
 Equipped with OIML C3 Approved 17-4PH Stainless Steel Load Cell Complete 
 Sealed Design, to Prevent Liquid Penetrate into Platform Structure Rugged
 Structure for Harsh and Rugged Environment
 Overload Protection Devices to Withstand Shock and Overloads 
 Safe Overload = 150% plus
 Ultimate Overload = 200% plus Adjustable Feet and Bubble Level Included

OPTIONS:
 RELAY-4, 4-Channels Relay Module
 WM Wireless Communication Module
 Stainless Steel Wall/Desk Mount Holder
 SP-POS58EZ Thermal Printer
 RD-DOT Dot Matrix Remote Display
 LP-50 Label Printer